 |
Solar Charge Controller |
|
|
|
|
| |
|
|
|
|
| |
|
|
| Aditya Energy Systems manufacturing a wide range of solar PV charge controllers for solar home lighting systems, street lighting systems and for various solar PV applications. |
| |
| Charge controllers, which protects battery from over charging and/or excessive discharge are the essential components of Solar PV systems. Aditya introduces professional Solar Charge Controllers using the most innovative and state of the art Charge controllers, |
|
|
| |
which protects battery from over charging and/or excessive discharge. |
|
| |
|
|
| |
The solar charge controller uses PWM charging technology, so that as the battery reaches full charge, the PWM pulses slower, gradually tapering off the charge. Pulsing is good for the batteries since it gently mixes the electrolyte, preventing stratification and sulphation. Low voltage disconnect protects the batteries from severe discharge by shutting off loads before the battery voltage drops to damaging levels.
|
|
| |
|
|
| |
Temperature compensation adjusts the set point voltages according to the ambient temperature. |
|
| |
|
|
| |
Features |
|
|
|
| |
| |
• Excellent charging algorithm
• Temperature compensated set points
• Adequate protections and indications
• Negligible voltage drops
• Self consumption less than 5 mA
• Offers long life to batteries
• Non-corrosive terminals
• Compact in size and easy to install |
|
|
| |
|
|
|
|
| |
Technical Specifications |
|
|
|
| |
|
|
| |
| General |
| Application |
Solar electrification |
| Use |
Battery Charge controller |
| Operating temperature |
-10°C to 65ºC |
| Storage temperature |
-10°C to 85ºC |
| Charge controller type |
Micro controller based |
| Charging type |
Two step series PWM charging algorithm |
| Battery temperature compensation |
-3mV to -4mV/°C/cell |
| Solar Module size (Max.) |
90Wp |
| Indications |
Charging, Low Battery, Full Charge |
| Electrical |
| Nominal system voltage |
12V DC |
| Charging current |
6A |
| Load current |
6A |
| Charge controller efficiency |
>95% |
| Idle consumption |
<5mA |
| Protections |
Against module reverse current flow, reverse battery and overload, short circuit, under and over voltage, under and over temperature |
| Mechanical |
| Fixing |
Wall mounting with screws |
| Case |
Injection Moulded Engineering Plastic |
| Connectors |
Heavy duty terminal connectors |
| Size (Shipping)(mm) |
115 X 100 X 40 |
| Weight (Shipping) |
180gms |
|
|
|
| |
|
|
|
|
| |
Protections |
|
|
|
| |
Overcharge Deep discharge Reverse polarity and lightning protections are incorporated in the electronic control card. Temperature compensation and blocking diodes are also built in control units. |
|
| |
|
|
Top |
|
